Remove the instrument panel VAZ 2110
Hello. We will show how to remove the instrument panel on the VAZ 2110, as well as replace the suspension bulbs.
Tools:
- Phillips screwdriver (short)
Removal and installation of the shield
1. From the bottom of the panel, unscrew the two screws for a Phillips screwdriver.
2. On top of the panel, unscrew the two screws, also under the Phillips screwdriver.
3. After unscrewing the screws, we remove the plastic cover of the instrument panel.
4. Disconnect the connectors on both sides that go to the buttons of the plastic lining and remove it to the side.
5. Unscrew the two screws securing the shield along the edges.
6. We disconnect the two latches of the shield and pull it out a little towards ourselves.
7. Disconnect two connectors.
8. After disconnecting the connectors, take out the instrument panel.
Reinstalling shouldn't be a problem. Everything is done in reverse order.
Replacing backlight lamps
1. We take the plastic rim of the lamp and turn it to the left. When turning, you will feel that the lamp is released.
2. We take a new lamp, insert it, and turn it to the right until it locks.
All lamps on the instrument panel of the VAZ 2110 are changed according to this scheme.
If something is not clear to you on removing the shield or replacing the lamps, watch the video below.
